行星式球磨法制備超細水鎂石粉體

編號：SBJS00137

篇名：行星式球磨法制備超細水鎂石粉體

作者：豐世鳳; 寧桂玲; 李鑫; 林源;

關鍵詞：水鎂石; 行星式; 球磨; 阻燃;

機構： 大連理工大學化工學院精細化工國家重點實驗室;

摘要： 使用行星式球磨機對水鎂石粉體進行超細研磨,討論了不同球磨工藝參數(球料比、球磨轉速、球磨時間,、料漿比)對水鎂石粉體出料粒徑的影響,并將研磨后的水鎂石粉體添加到不飽和聚酯樹脂中,制得聚酯材料,。使用激光粒度分析儀和掃描電鏡對粉體的粒徑和形貌進行了表征;使用熱重分析儀、氧指數測定儀對聚酯材料的熱分解性能和燃燒性能進行了測試,。結果表明,在球料比2.5,、球磨轉速450 r/min,、球磨時間20min,、料漿比1時,水鎂石粉體的粒度顯著降低(d_(50)=0.14μm,d_(90)= 0.21μm)且形貌均勻;添加研磨后的水鎂石粉體制得的聚酯材料熱分解溫度顯著提高,具有優異的阻燃性能,。在最大熱分解速率時的溫度從352.72℃提高到379.14℃,氧指數由26.3提升到30.5,達到難燃要求。 The fine brucite powder was prepared by high-energy planetary ball milling in this paper.The influences of ratio of ball material,milling time,ball grinding rotational speed on powder particle size were discussed.The composite materi- als were obtained by adding the nano powder in the unsaturated polyester resin.The powder particle size and morphology were characterized by the laser granularity analyzer and scanning electron microscopy(SEM);the thermal decomposition and combustion properties were tested