Power

輸入電源

Power rated: 4KW (220V)

額定功率：4KW (220V) 

Voltage

電壓

Voltage rated: AC 220V 50/60HZ

額定電壓：AC 220V 50/60HZ

Furnace Construction

爐子結構

High purity fibrous alumina insulation for maximum energy saving - 30% less power consumption than other brands

采用高純氧化鋁作為爐膛材料,，**程度減小能量損失，比一般加熱爐減少30%能耗,。

Double air cooling structure to control furnace surface Temp. no more than 60℃ when furnace is heated into max. Temp.

爐體采用雙層結構，中間設置風道,，保證爐體表面溫度和電氣控制部分溫度不超過60℃,。

The spring door buckle is used to solve the contraction gap caused by high temperature in the chamber of the equipment.

采用彈簧門扣,，很好的解決了設備內膛因高溫產生的收縮縫隙。

Equipped with inspection window on the front,convenient to to observe the situation inside the chamber

前門設有觀察窗,，便于觀察腔體內部情形

Working Temperature

工作溫度

Max. Temperature: 1200℃( 1 hr)

**溫度：1200℃ (1小時)

Continuous working temperature: ≤1000℃

持續工作溫度：≤1000℃

Recommended Heating Rate: 5-40℃/min

推薦升溫速率：5-40℃/分鐘

Max. heating rate

**升溫速率

50℃/min

50℃/分

Temperature Controll

控溫方式

PID automatic control and auto-tune function.

模糊PID控制和自整定調節

30 programmable segments for precise thermal processing.

智能化30段可編程控制

Built-in protection for the over-heated and broken thermocouple. 

超溫和斷偶報警功能

Thermocouple

熱電偶

K type

K型

Heating Elements

加熱元件

Fe-Cr-Al Alloy doped by Mo

電阻絲（摻鉬鐵鉻鋁合金）

Temperature Accuracy

控溫精度

+/- 1℃

Dimensions

尺寸

Chamber size(L*D*H): 250*300*250mm (18.7L)

腔體尺寸(長*深*高)：250*300*250mm (18.7L)

Net Weight

凈重

52kg

Warranty

質保

One year limited warranty with lifetime support  (Such consumable parts as resistance wire are NOT supported by the warranty)

一年質保終身支持（消耗品如電阻絲不在質保范圍內）

Attention

警示

The equipment is not sealed, and can not be put into toxic, harmful, inflammable and explosive gas. Can add the inlet port to pass through the inert gas or oxygen.

此設備腔體不密封，不能通入有毒有害,，易燃易爆氣體,。可以加裝進氣接頭,，通惰性氣體或者氧氣

Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.

在使用過程中爐膛表面可能出現細小裂紋。這是正常情況,，裂紋可以用氧化鋁涂層修復,。

You shall place the sample in to a crucible.  Never place sample on the chamber bottom directly.

應該把樣品放進坩堝里。不要把樣品直接放在腔底,。

Compliance

認證

CE Certified

CE認證

All electric components ( >24V) are UL / MET / CSA certified

所有電氣部件( >24V)都有UL / MET / CSA 認證

The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost.

可付費進行TUV(UL61010)或CSA認

標準配置