看了塑料粒子專用水分測定儀的用戶又看了
留言詢價
虛擬號將在 180 秒后失效
使用微信掃碼撥號
| Omnimark Instrument Mark3模塊化的水份測定設備用于樣品量極大的生產檢驗,。Mark3是根據失重法(Loss On Drying)的測試原理,。它主要由兩個模塊組成，加熱和控制模塊,。加熱模塊利用紅外線石英管加熱,，使樣品均勻地快速受熱?？刂颇K更可同時連接四組加熱模塊,，同時檢定四個相同或不同樣品,，增加檢定效率。每個模塊可以設定不同的測量參數,。在設置菜單中存儲的表格可以控制哪個用戶可以使用哪個模塊,，防止從其他人的模塊測量引起的混淆，確保測量的可追溯性,。 | |
| 另外,，Mark 3特別適合用于塑料行業，它在塑料行業的優勢（主要與卡氏法水分儀比較）： | |
| 加熱失重法原理,，檢測無需試劑,，無后期費用 | |
| 檢測時無釋放有毒氣體，更環保 | |
| 樣品無需預處理,，操作簡便,，既能用在實驗室也能用在車間現場 | |
| 標準ASTM6980(該標準專門針對塑料水分檢測的) | |
| |
2 Models | Mark 3 | Mark 3 HP |
|---|---|---|
| Display of results | 0.01% | 0.001% |
| Balance resolution | 0.001 grams | 0.0001 grams |
| Balance capacity | 100 grams | 100 grams |
| Balance repeatability | +/-0.0005g | +/-0.0001g |
| Recommended working range | 0.02 to 99.98% | 0.005 to 99.995% |
Specifications | |
|---|---|
| Method of Measurement: | Loss on drying via four infrared quartz cylinders |
| Modular configuration: | Control and Heater modules (Optional: up to 4 heater modules) |
| Temperature setting/control: | 30-210o C in one degree increments via RTD sensor， +/- 1oC |
| Temperature steps: | Programmable one or two with selectable ramp rate |
| Standby temperature: | 30-160o C in one degree increments with selectable equilibration time |
| Temperature display: | Display of both target and current temp at each stage of testing and standby |
| Conserve mode clock: | Programmable time by day of week to shut down and wake up analyzer |
| Balance module design: | Monolithic weighing cell with protective stainless steel cover |
| Balance calibration: | Internal calibration weight or external weights accepted for manual calibration |
| Ideal weight: | Audio and visual display for programmable target sample weight addition |
| Target limit alert: | Minimum and maximum programmable limits and screen alert when test done |
| Program storage: | 300 programs with unique settings,， alphanumeric naming |
| Result storage: | 999 results with statistics: Average,， SD， RSD,， high and low |
| Units of measure of results: | Weight,， %Moisture， %Solids,， %Volatiles,， Fuel Moisture， PPM,， mg/L |
| Endpoint determination: | Actual slope,， Calculation and Time modes |
| Sample ID: | Numeric， incremental,， alphanumeric or turned Off |
| Modes of operation: | Standard test,， Syringe， "Splash" method or Concentration modes |
| Security mode: | Selectable setup and operation protection with numeric code |
| Graph mode: | Graph of temperature and percentage over time |
| Display: | Quarter VGA with contrast adjustment (black on white or white on black) |
| Keypad: | Sealed membrane with audible tactile feedback |
| Internal printer: | Built-in thermal,， 40 character graphic with selectable format |
| Power requirements: | 90-250 VAC 50/60 Hz self adjusting power supply |
| Dimensions (L x W x H): | 16.25'' x 19.5'' x 9.25'',， shipping weight 35lbs (includes one heater module) |
| Warranty period: | 2 years， complete parts and labor |
暫無數據,！
塑料粒子專用水分測定儀的工作原理介紹？塑料粒子專用水分測定儀的使用方法,？塑料粒子專用水分測定儀多少錢一臺,？塑料粒子專用水分測定儀使用的注意事項塑料粒子專用水分測定儀的說明書有嗎？塑料粒子專用水分測定儀的操作規程有嗎,？塑料粒子專用水分測定儀的報價含票含運費嗎,？塑料粒子專用水分測定儀有現貨嗎？塑料粒子專用水分測定儀包安裝嗎,？
手機版：
工商已核實
